Eaton CROUSE-HINDS-Serie Betriebsanleitung Seite 13

8. Operation and fault analysis
Operation
Switch position Main beam on
Pilot lamp
dimmed
Pilot lamp
Main lamp
Main lamp
Main lamp
Flashing
flashing
mean beam
Flashing
mean beam
Charging
OFF
OFF
Main lamp
Flashing
main lamp
Pilot lamp
Explosion protected portable searchlight
SEB 8, SEB 8 L, SEB 8 ADR, SEB 8 DIN, SEB 8 L DIN
Flashg. Pilot light
main beam on
flashing
LED display Cause
pulsing red Defect. pilot lp.
none Function ok
Acc. to batt. Defect. main lamp
capacity
Acc. to batt. Function ok
capacity
only red LED Deep discharge
or none protection active
function ok
Acc. to batt. Function ok
capacity
Acc. to batt. Defect. main lamp
capacity
Acc. to batt. Charging
cap. or leading completed
LED pulsing
None Defective
electronics
Acc. to batt. Function ok
cap. or pulsing
LED
Acc. to batt. Function ok
cap. or pulsing
LED
Acc. to batt. Recharge
cap. or pulsing period extended
LED to 28 hours
GB
Measure
Replace pilot lamp
None
Replace main lamp
None
Recharge
None
Replace main lamp
None
Searchlight
to be passed
for repair
None
None
None or switch
to OFF pos.
13