Werbung
Verfügbare Sprachen
Verfügbare Sprachen
e) Avoid abnormal working postures. Make sure
you stand squarely and keep your balance at
all times. This will enable you to control the
power tool better in unexpected situations.
f)
Wear suitable clothes. Never wear loose t-
ting clothes or jewelry. Keep hair and clothing
away from moving parts. Loose clothing,
jewelry or long hair can be caught by moving
parts.
g) If dust extraction devices and dust collection
devices can be tted, they must be connec-
ted and must be used correctly. The use of a
dust extractor can reduce the dangers posed
by dust.
h) Do not allow yourself to be lulled into a false
sense of security and do not ignore the safety
regulations covering electric power tools,
even if you are familiar with the power tool
after having used it many times. Carelessness
can lead to serious injuries in just a fraction of
a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use the
correct electric tool for the job in hand.
The correct tool will enable you to work better
and more safely within the speci c perfor-
mance range.
b) Do not use an electric power tool if the
switch is defective. An electric power tool
that cannot be switched on or o is dange-
rous and must be repaired.
c) Pull the plug out of the socket and/or
remove the removable battery pack be-
fore making any adjustments to the tool,
changing plug-in tool parts or putting the
power tool down. These precautions will
prevent the power tool starting accidentally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the power tool
or who have not read these instructions
to use the power tool. Electric tools are
dangerous if they are used by inexperienced
people.
e) Look after power tools and plug-in tools
with care. Check that moving parts
function correctly and do not jam, and
whether any parts are broken or dama-
ged such that they adversely a
function of the power tool. Have damaged
parts repaired before you use the power
tool. Many accidents are caused by poorly
maintained electric tools.
GB
f)
Keep cutting tools sharp and clean.
refully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Use the power tool, plug-in tools, etc.
as set out in these instructions. Take ac-
count of the conditions in your work area
and the job in hand. Using electric tools for
purposes other than the one for which they
are designed can result in dangerous situa-
tions.
h) Keep the handles and grip surfaces dry,
clean and free from oil and grease.
handles and grip surfaces are slippery, it will
not be possible to operate and control the
power tool safely in unforeseen situations.
5. Service
a) Have your power tool repaired only by
trained personnel using only genuine
spare parts. This will ensure that your power
tool remains safe to use.
Safety information for drills
a) The drill must be secured.
secured properly, it could move or topple over
and this could cause injuries.
b) The workpiece must be clamped or fas-
tened on the workpiece support. Do not
drill into workpieces which are too small
to be clamped securely. Using your hand to
hold the workpiece could result in injuries.
c) Do not wear gloves. Gloves could get
caught by rotating parts or drilling chips and
lead to injuries as a result.
d) Keep your hands away from the drilling
area while the power tool is running. Con-
tact with rotating parts or drilling chips could
cause injuries.
e) The drilling tool must be rotating before
you move it up to the workpiece. If not, the
drilling tool can become caught in the workpi-
ece and cause unexpected movement of the
workpiece, leading to injuries.
f)
If the drilling tool becomes blocked, stop
pressing it any further down and switch
o the power tool. Find and rectify the
cause of the blockage. A blockage can
cause unexpected movement of the workpie-
ect the
ce and lead to injuries.
g) Prevent long drilling chips by interrupting
the downward pressure at regular inter-
vals. Sharp metal chips can get entangled
and cause injuries.
- 8 -
Ca-
If the
If the drill is not
Werbung
