Charging Methods - Dreame R10 Pro Benutzerhandbuch

Charging
Fully charge the vacuum before using it for the first time.
Note:
• A full charge will take approximately 4 hours.
• Using Turbo mode for a prolonged period will cause the battery to heat up, which
increases charging time. Allow the vacuum to cool down for 30 minutes before
charging it.

Charging Methods

Charging the vacuum with the charger
LED Battery Status Indicator
Low battery
Half battery
Nearly full
Fully charged
Off Blinking
Note: Once the vacuum is fully charged, the indicator will turn off after 5 minutes, and the
vacuum will enter the energy-saving mode.
On
EN
7