Configuration - Megasat Classic Line 19 Bedienungsanleitung

7. The Main Menu

7.6 Configuration

In the menu configuration, you can set up ba-
sic settings of the TV.
OSD language
Teletext
Audio language Select the preferred audio language of TV channels
Subtitle lang.
Hearing impaired Choose between on / off
Blue Screen
First instalation Start the first installation of the TV (see page 9)
Factory setting Sets the TV back in the factory setting. All data you have made
Software update If there is a new firmware for the TV, you can this update here. You
Energie mode
HDMI CEC
Select the language of the screen menus
Select the character set of teletext (West, East, ...)
Select the preferred subtitle language of the TV channels
Displays a blue screen background color
will be lost.
can find the latest firmware always on our homepage
www.megasat.tv
1. Copy the firmware to the root directory of a formatted USB drive
(without subfolders).
2. Plug the USB drive into the USB slot of the TV.
3. Now press the OK button on Software Update (USB). You will be as-
ked whether you really want to update. Select „Yes" or „No" to cancel.
4. Once the firmware has been updated, the TV restarts and starts
the initial installation.
Wählen Sie zwischen Home Mode (low power consumption) or
Shop Mode (higher power consumption)
When activated, devices connected to the TV via HDMI can
communicate with the TV. Either the TV can control the connected
devices (restricted) or vice versa.
ENGLISH
21