5. Operation
5.1. Selecting channels
To select a channel, either press the C H + / – buttons (on the device) or the
P + / - buttons (on the remote control) or select the channel directly by pres-
sing the appropriate numbers.
For a two or three-figure number, press the numbers one after another.
Press the
button to select the last channel played.
5.2. Sound settings
You can increase or decrease the volume by pressing the volume buttons
on the remote control or on the device.
Press the mute button
Use the A U D I O button to select from the available audio languages (audio
channels). If the current programme supports DUAL mode (e.g. for dual langua-
ge programmes), you can select DUAL mode.
Use the S . M O D E button to select from the sound modes: STANDARD,
MUSIC, MOVIE, SPORTS, PERSONAL. The PERSONAL setting is
defined in the SOUND > SOUND MODE menu.
5.3. Screen settings
Use the P. M O D E button to select from the picture modes: DYNAMIC,
STANDARD, MILD, PERSONAL. The PERSONAL setting is defined in
the PICTURE > PICTURE MODE menu.
Depending on the programme, the pictures are displayed in the formats 4:3 or
16:9. Use the S I Z E button to adjust the picture format:
AUTO (not available for ATV)
The format displayed is automatically adjusted to match the input signal.
4:3
For undistorted screen dis-
play in 4:3 format.
16:9
For undistorted screen dis-
play in 16:9 format.
ZOOM 1
The image is stretched in
all directions in level 1.
26
to switch the volume fully off and on again.