Medion LIFE P15223 Bedienungsanleitung Seite 120

Menu Item Setting
22KHZ
TONE-
BURST
DISEQC
1.0/1.1
MOTOR
In order to start the search, press the blue button (SCAN) and
conform with O K .
8.2. Picture menu
Menu Item
PICTURE
MODE
CONTRAST
BRIGHT-
NESS
COLOUR
TINT
SHARPNESS Increase or decrease sharpness (on a scale of 0 – 100).
Set the sound here, the default setting is AUTO.
If your satellite system requires a tone burst, you
can set it to BURST A or B here.
If you have connected multiple LNBs or a DiSEqC
switch to your satellite aerial, set the desired LNB
here.
If you satellite is controlled by a motor, select the
desired DiSEqC version with . Press the O K
button to define the position of the aerial.
PICTURE
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
HDMI Mode
Move
Setting
Select the picture mode: STANDARD, DYNAMIC,
MILD, PERSONAL. This function corresponds to the
P. M O D E button.
In the PERSONAL setting, you can set the CONTRAST,
BRIGHTNESS, COLOUR, TINT and SHARPNESS
yourself. The other parameters are defined.
Increase or decrease contrast (on a scale of 0 – 100).
Increase or decrease brightness (on a scale of 0 – 100).
Increase or decrease the colour (on a scale of 0 – 100).
Hue settings only available for NTSC reception.
Standard
50
50
50
50
50
Normal
Middle
Auto
Return Select
MENU OK
EXIT Exit
DE
EN
47