Operating Determinations - Omnitronic W.A.M.S-04D Bedienungsanleitung

3. OPERATING DETERMINATIONS

The portable PA system W.A.M.S-04D consists of a 2-way speaker system and an amplifier with
connections for three microphones and one line source as well as inputs for recording devices and a further
active speaker system. The amplifier supplies a power of 100 W max. Additionally, the unit features a
CD/MP3 player, a tape deck, and a wireless single antenna receiver operating with the fixed VHF frequency
202.950 MHz. Delivery includes a dynamic hand-held microphone which serves for wireless signal
transmission of speech and vocals to the receiving unit. The optional pocket transmitter TM-200A can
also be used for a wireless signal transmission as it is tuned to the frequencies of the receiving unit like the
hand-held microphone. The PA system is equipped a telescopic trolley handle and two wheels and thus is
ideal for mobile use.
The unit can be operated with 230 V mains voltage, via the internal rechargeable batteries or via 18 V direct
current from an external source. The batteries can be charged with the integrated charging part. The
wireless microphone operates with two 1.5 V mignon batteries.
The PA system was designed for indoor use only.
Operating an amplification system in public or industrial areas, a series of safety instructions have to be
followed that this manual can only give in part. The operator must therefore inform himself on the current
safety instructions and consider them.
The given maximum power of the speaker system describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is – as of all comparable systems (also from other manufacturers)
– significantly lower. When operating the speaker system, please make sure that the loudspeakers always
sound well. When distortions can be heard, either the amplifier or the loudspeaker is overloaded. Overloads
can quickly lead to amplifier or speaker damage. In order to avoid damage, please reduce the volume
immediately when distortions can be heard. When speaker systems are destroyed by overload, the
guarantee becomes void.
By operating amplifying systems, you can produce excessive sound pressure levels that may lead to
permanent hearing loss.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void.
Please consider that unauthorized modifications are forbidden due to safety reasons!
25/40 00055367.DOC, Version 1.0