Herunterladen Diese Seite drucken

Klarstein DRYFY 10 Bedienungsanleitung Seite 20

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EN
20
Auto dehumidifying mode
If the humidity in the room is above 5 % of the set humidity, the compressor and fan start.
If the humidity in the room is less than 5 % of the set humidity, the compressor stops and
the fan runs again at the preset speed. When the humidity decreases or increases, the
compressor and fan start and stop alternately. The preset humidity is 50 %.
Cloth dry mode
Under this mode, the unit will work regardless of the room humidity, compressor works,
and fan will work from high speed, fan speed is adjustable.
Drainage manually
• When water tank is full, water-full indicator is on, the unit will stop working, and
buzzer will sound 10 times till water is pour off.
• Take out water tank, pour away water.
• Replace the water tank, dehumidifier restarts working. Please install the water tank
as the following photo.
Note: Before putting in the water tank, please ensure the float is flexible.

Werbung

loading

Diese Anleitung auch für:

1003204010032662