AKG MicroMic III Serie Bedienungsanleitung Seite 27

3 Using Your Microphone
stance, in order to prevent it being damaged
during shipping.
3. Place the cable around the fins on the instal-
lation plate to relieve the microphone of the
strain of the cable.
You can permanently mount the microphone on
your instrument or speaker cabinet in one of the
following ways:
A. Using Screws
1. Remove two of the rubber eyelets from the
H 416 installation plate and insert them into the
holes in the bracket, sliding them through the
slot.
2. Depending on the material and thickness of the
installation surface, use the 13-mm (0.5-in.) fil-
lister head self-tapping screws or the 30-mm
Fig. 9: Cable strain
relief.
Refer to fig. 9.
3.2.2 Permanent
Installation
Fig. 10: Fixing the
microphone direct-
ly on an instru-
ment/speaker.
Refer to fig. 10.
27