AKG MicroMic III Serie Bedienungsanleitung Seite 24

2 Interfacing
B 15) and use an XLR cable (5) (e.g., an optional
MK 9/10 from AKG) to connect the phantom
power supply (4) to the desired balanced input.
2.3.3 Connecting Refer to the manual of your bodypack transmitter.
to a Bodypack
Transmitter
3 Using Your Microphone
3.1 Introduction Before permanently mounting the microphone on
your instrument or speaker cabinet, experiment
with various microphone positions to get the best
possible sound. Fix the microphone temporarily
using the supplied adhesive putty.
Sections 3.3 to 3.5 describe proven techniques
that you may want to use as starting points for
your own experiments.
3.2 Mounting The supplied mounting hardware (see list below)
the Microphone lets you mount the microphone either perma-
nently or by a detachable snap-on connection.
1
Fig. 5: Mounting
4
hardware
1 H 416 installation plate
2 3 rubber eyelets (in H 416)
3 2 double-sided adhesive rubber plates
4 3 fillister head self-tapping screws
(2.9 x 13 mm)
24
2 3
5 6