Important Information On The Control Solution; Reading The Results; For Blood Sugar Tests; For Β-Ketone Tests - Diatesse Xper Handbuch

Important information on the
control solution
• Only use TaiDoc (W2) control solution for your
meter.
• Do not use the control solution after its expiry
date or later than 3 months after opening it.
Write the date you opened it on the control
solution bottle and dispose of any remaining
solution after 3 months.
• The recommended room temperature when
performing a test with the control solution is
between 20 °C and 25 °C (68 °F and 77 °F).
• Ensure that the control solution, your meter
and the test strips are at the recommended
temperature before conducting a test.
• Shake the control solution well before use
Discard the first droplet of control solution
and wipe the dispensing tup clean in order to
guarantee a pure sample and accurate result.
• Keep the control solution properly sealed at a
temperature between 2 °C and 30 °C (35.6 °F
and 86 °F). DO NOT freeze.

READING THE RESULTS

For blood sugar tests

MESSAGE
< 0.56 mmol/L (10 mg/dL)
>13.3 mmol/L (240 mg/dL)
> 44.4 mmol/L (800 mg/dL)
For β-ketone tests
MESSAGE
< 0.1 mmol/L
0.1 to 8.0 mmol/L
> 8.0 mmol/L
WHAT IT MEANS
WHAT IT MEANS
13