Setting Up The Meter; Setup Mode; For Blood Sugar Testing; For Β-Ketone Testing - Diatesse Xper Handbuch

SETTING UP THE METER

Before using your meter for the first time or
whenever replacing its batteries, check and adjust
the following settings:
Open the setup mode (a)
The meter is switched off (a test strip is not
inserted). Press the button marked S beside the
batteries.
1. Setting the date
The sequence for setting the date is YEAR ➞
MONTH ➞ DAY. When YEAR/MOTH/DAY are
flashing consecutively, press the button marked
M to select the correct setting. Next, press S.
2. Setting the date format
Press the main button M on the front of the
meter to select the required date format (12 or
24 hour). Then press S.
3. Setting the time
When HOUR/MINUTE are flashing consecutively,
press the button marked M until the correct time
is displayed. Then press S.
4. Turning sound effects on/off
For sound effects press the button marked M on
the display to switch between "On" and "OFF".
Then press S.
5. To set a reminder
Your meter has four reminder settings. The meter
displays "On" or "OFF" and
want to set a reminder notification, then press
S to skip this step. Otherwise press the button
marked M to select "On" and then press S.
When the HOUR/MINUTE are flashing, press M
to select the desired HOUR/MINUTES. Then press
S and continue to the next alarm setup.
PLEASE NOTE: When the reminder notification
goes off, press M to switch it off. The reminder
will sound for 2 minutes and then switch off
automatically.
6
. If you do not
6. Turning on Bluetooth (Bluetooth® is
optional)
When "bt" is visible on the display press M and
select "On" or "OFF". Then press S.
PLEASE NOTE: This means that data is
transferred using Bluetooth®. If you select "On",
then the results are transmitted immediately
after the test.
NOTE:
• ALL of these parameters can be changed in the

setup mode.

• If the meter is not used for a period of 3
minutes while in setup mode, it switches off
automatically.
SETUP MODE
Measuring methods:

For blood sugar testing

You can measure your blood sugar levels in three
different ways: General, AC (before meals) and PC
(after meals). You can switch between the different
modes as follows:
1. Start with the meter switched off. Insert a blood
sugar test strip into the slot to turn the meter
on. The display shows, "
"GLU".
2. Press M to switch between General, AC and PC.
For β-ketone testing
There is only one option for measuring your
β-ketone levels: Gen. Start with the meter switched
off. Insert a β-ketone test strip into the slot to turn
the meter on. The display shows "
" ", "Gen" and "KET".
" flashing " " and
", a flashing