Before You Start; Important Information; Meter Overview - Diatesse Xper Handbuch

BEFORE YOU START

Important information

• Extreme dehydration and excessive moisture-
loss can lead to results being measured that are
below the actual values. If you suspect you are
suffering from extreme hydration, contact your
healthcare professional immediately.
• If your blood sugar or β-ketone levels are
lower or higher than normal and you are not
displaying any symptoms of being ill, then
repeat the test. If you are displaying symptoms
or if you continue to receive results that are
lower or higher than normal, then contact your
healthcare professional and follow their advice.
• Only use fresh whole blood samples for testing
your blood sugar and β-ketone levels. Using any
other substances will produce incorrect results.
• If you are displaying symptoms that do not
match the test results and if you have followed
all the instructions in this manual, then please
contact your healthcare professional.
• We do not recommend that this meter be used
for persons with very low blood pressure or
those in a state of shock. Always consult your
healthcare professional.

Meter overview

4
Test strip slot and strip indicator light
1
Insert your test strip, the section containing
the contact points, into this slot (so that it is
firmly in place) in order to turn the meter on
for your test.
Bluetooth® indicator light
2
Bluetooth® can be optionally activated.
Ejecting the test strip
3
Eject the test strip by pushing this button
upwards.
Display
4
Mains button (M)
5
Open the memory of the meter and turn off
the reminder.
Data port
6
Download the test results to your computer
using a USB cable.
Battery compartment
7
SET button (S)
8
Input the selected meter settings and confirm
them. The SET button is located in the battery
compartment.