Measurement Parameter - Altana BYK color2view Family Kurzbedienungsanleitung

color2view Family

4 Measurement Parameter

Go to Configuration > Measurement parameter.
Traceable to
Aperture
Color system
Color equation
Measurement Screen Select the values to be displayed after a measurement. Default
Color indices
Gloss
Illumination
Observer
Fluorescence
Statistics
Always use
autostandard
Always continue
last test series
For additional parameter see "Jetness Measurement" (Pro version).
8
Select the measurement mode:
• NRC: Results can be compared with results of the
tional Research of Canada".
• Color-view: Results can be compared with the "color-
view", the predecessor of the "color-2-view".
Default is NRC.
Select aperture mounted on the instrument. Default is 32 mm.
Select color system. Default is CIE L*a*b*.
Select color equation. Default is ΔE*.
is ΔSMP (difference sample to standard).
Select color indices. Default is none.
Turn gloss measurement on or off.
Select standard illuminant. Default is D65.
Select standard observer. Default is 10°.
Refer to "Fluorescence Measurement". Default is ΔFl.
No. of readings to be taken per sample. Statistics are evalu-
ated, if n > 1.
Search for nearest standard is always active.
No new test series is created; latest series is opened automatic-
ally.
BYK-Gardner GmbH
"Na-
301 500 209 - 2307