Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disclaimer
Please be careful when using your CNC machine. This machine is an electrical device with moving parts and dangerous working
areas.
Genmitsu CNC Machines are for Indoor Use Only.
You must be 18 years or older to operate this machine, unless supervised by a knowledgeable adult familiar with the machine.
Wear proper Personal Protection Equipment (Safety Glasses etc.).
Always place the CNC Machine on a stable surface.
The 3030-PROVer MAX utilizes a high amp power supply. It is recommended that you do not plug the CNC Router into an
extension cord, or power strip as it may damage the machine.
Ensure the Emergency Stop Button is easily accessible at all times.
Never disassemble the Power Supply or Electrical Components. This will VOID the warranty.
DO NOT TOUCH the machine spindle, or place any body part near the working area when the machine is operating. Serious injury
may occur.
DO NOT leave children unsupervised with the CNC Machine even when it's not operating. Injury may occur.
DO NOT leave the machine unattended while it's operating.
Ensure your CNC Machine is in a well-ventilated area. Some Materials may discharge smoke or fumes during operation.
02
Werbung
