Genmitsu 3030-PROVer MAX Benutzerhandbuch Seite 14

Mechanical Installation
STEP 2 Installing Spindle Motor Mount
What you need:
05 Spindle Motor Mount 24
(4) M4×18 Hex Socket Cap Screw
Use (4) M4×18mm screws to fix the Spindle Motor Mount to the Z-axis slider as shown.
Note: Do not fully tighten the screws during this step. Keep assembly loose to allow you to position the spindle mount height easier.
Z-axis Slider
(4) M4×18 Hex Socket Cap Screw
Spindle Motor Mount
12