Herunterladen Diese Seite drucken

Emerson Aventics SentronicPLUS 614 Serie Installationshandbuch Seite 10

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB
WARNING NOTES
These products are intended for use in industrial compressed air systems only. Do not use these products where
pressures and temperatures can exceed those listed under SPECIFICATIONS. Please also see the corresponding prod-
uct specification sheets.
Before using these products with fluids other than those specified, for non-industrial applications, life-support sys-
tems, or other applications not within published specifications, consult EMERSON.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of all component parts used in fluid power systems
and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such
failure.
System designers must provide a warning to end users in the operating manual if protection against a failure mode
cannot be adequately ensured.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and
shipped with these products.
6.
ACCESSORIES
description
Straight M12 female connector, 5 pins, with screw terminals
Right-angle M12 female connector, 5 pins, with screw terminals
Supply cable 2 m, 2 x 0,25 mm², straight connector
Supply cable 2 m, 2 x 0,25 mm², right-angle connector
Supply cable 5 m, 6 x 0,56 mm², straight connector
Supply cable 5 m, 6 x 0,56 mm², right-angle connector
Supply cable 10 m, 6 x 0,56 mm², straight connector
Supply cable 10 m, 6 x 0,56 mm², right-angle connector
Parameter adapter USB, 1 m cable
7.
MAINTENANCE AND CARE
No special maintenance or care required.
10
Visit our website at Emerson.com/AVENTICS
INSTALLATION
catalogue number
88100256
88100725
88100726
88100727
88100728
88100729
88100730
88100731
N50930300100000

Werbung

loading