Werbung
3) Pull out the crown to the second click when the second hand
is at the 12 o'clock position. It will stop on the spot. Set the
hands to the desired time of the day (make sure AM/PM is set
correctly) by turning the crown.
* When the crown is at the second click position, do not press any
button. Otherwise the chronograph hands
will move.
4) Push the crown back in the normal position in accordance with a time
signal.
* Do not set the date between 9:00 P.M. and 1:00 A.M, otherwise the
day may not change properly. If it is
necessary to set the date during the time period, firstly change the time
to any time outside it, set the date and
then reset the correct time.
Werbung
