Werbung
If either of the stopwatch hands are not in the "0" position , reset them
following the procedure below.
1) Pull the crown out to :
VD50, VD51, VD52, VD53, VD57 (calibres with date window):
second click
VD54, VD55, VD56, VD59 (calibres without date window) : first click
2) Press button A or B to reset all stopwatch hands to "0" position.
* The stopwatch minute hand moves correspondingly with the stopwatch
second hand.
* The hands move quickly if the respective buttons are kept pressed.
3) Push the crown back to the normal position.
TIME SETTING
* Before setting the time, check that the chronograph measurement is
stopped.
VD50, VD51, VD52, VD53, VD57 (calibres with date window) :
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the preview day's date appears.
Werbung
