Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O P E R A T I O N I N S T R U C T I O N S
1.
For the first time to operate the appliance, please fill with the water before bringing power to the
appliance.
2.
Turn on the circuitbreaker or plug in the socket to bring power to the electric hot water tap.
3.
In standby mode, the LED display screen light on and display the setting outlet temperature, after 2
seconds, it will display the outlet temperature.
4.
Touch switch to turn on/off the power of the power of appliance. Press + and - to increase or
decrease the outlet temperature.
5.
Touch + and - at the same time, hold on for 10S', the temperature setting key will be locked. in locked
mode, there is lock code L o c: display on screen. While the setting temperature is above 38 °C, then
you lock the settingkey, the setting temperature will be locked at 38 °C; while the settingtemperature
is below 38 °C, then you lock the settingkey, the setting temperature will keep current setting.
6.
, In OFF mode, touch + and - at the same time, hold on for 5S', the operation panel will enter into
temperature display conversion mode. Please single touch + or- to convert temperature display
between °F and °C.
7.
While rotate handle toward to the circle the appliance keep closed mode.
8.
While you rotate the hand shank toward to C the cold water will come out. Rotate the knob anti-
clockwise, the cold water flow will be larger& larger.
9.
Rotate the handle shank to H the hot water comes out. Rotate the knob clockwise, the hot water flow
will be larger & larger, meanwhile the program will mini adjust the working power to reach the setting
temperature.
10.
The nozzle is rotatable in 180°.
WARING!
If the outlet temperature can not reach the settingtemperature, maybe because the water
flow is too high, please reduce the hot water flow.
missionair
T E L . ( + 4 8 ) 7 9 7 4 5 1 1 1 1
B I U R O @ M I S S I O N A I R . P L
S E R W I S @ M I S S I O N A I R . P L
EN
W W W . M I S S I O N A I R . P L
27
Werbung
