Herunterladen Diese Seite drucken

Mission Air HYDRO FLOW 3,3 KW DARK Betriebs Und Installationsanleitung Seite 24

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 33
I N S T R U C T I O N
3Make the water connection pass through the rubbermat, please notice there is a cavity at
the rubber mat to fit the power cord.
Fig 3-A power cord above the table-board
hand shank
Make the water inlet connection pass through the hole in table-board.
1.
If the powercord need to be connect above the table-board, please keep thecable above
the table; please refer to Fig4-A;
2.
If the power cord need to be connected under the table-board, please make the
cablepass through the hole in table-board. Please refer to Fig4-B;
Fig 4-A power cord above the table-board
hand shank
table board
missionair
T E L . ( + 4 8 ) 7 9 7 4 5 1 1 1 1
power cord
rubber mat
power cord
rubber mat
B I U R O @ M I S S I O N A I R . P L
Fig3-B Power cordunder the table-board
hand shank
Fig 4-8 Power cord under the table-board
hand shank
table board
S E R W I S @ M I S S I O N A I R . P L
EN
rubber mat
power cord
rubber mat
power cord
W W W . M I S S I O N A I R . P L
24

Werbung

loading

Diese Anleitung auch für:

Hydro flow 3,3 kw silver