Werbung
Software License and Limited Warranty
Copyright 2004, Siemens Subscriber Networks, Inc.
All rights reserved. Printed in the U.S.A.
Siemens Subscriber Networks, Efficient Networks, the Efficient Networks logo, and SpeedStream(tm) are trademarks of
Siemens AG. All other names may be trademarks, service marks or registered trademarks held by their respective companies.
This document is for information purposes only,Siemens Subscriber Networks is not responsible for errors or omissions here-
in. Siemens Subscriber Networks reserves the right to make changes to product specifications without notice.
SIemens Subscriber Networks, Inc. – End User Software License and Warranty
INSTALLATION OF THE HARDWARE AND SOFTWARE PROVIDED BY SIEMENS SUBSCRIBER NETWORKS, INC (SSN). CON-
STITUTES ACCEPTANCE BY YOU OF THE TERMS OF THE FOLLOWING SOFTWARE LICENSE AND LIMITED WARRENTY. IF
YOU DO NOT ACCEPT THESE TERMS, PLEASE RETURN THE HARDWARE AND SOFTWARE AND SOFTWARE IN ITS ORIGI-
NAL PACKAGING TO THE VENDOR FROM WHICH YOU PURCHASED IT FOR A FULL REFUND OF THE PURCHASE PRICE.
The following describes your license to use the software (the"Software") that has been provided with your Siemens customer premise equipment
("Hardware") and the limited warranty that Siemens Subscriber Networks provides on its Software and Hardware. Siemens Subscriber Networks
reserves any right not expressly granted to the end user.
Software License
The Software is protected by copyright laws and international copyright treaties. The Software is licensed and not sold to you. The definition
od Software includes, but not limited to, system and operating software marketed by Siemens Subscriber Networks, including firmware, em-
bedded software, software provided on media, downloadable software, software for configuration or programmable logic elements, and all Si-
emens Subscriber Networks maintenance and diagnostic tools associated with the above mentioned software. Accordingly, while you own the
media (such as CD ROM or floppy disk) on which the software is recorded, Siemens Subscriber Networks or its licensors retains ownership of
the Software itself.
1. Grant of License. You may install and use one (and only one) copy of the Software in conjunction with the Siemens Subscriber Networks
provided Hardware. You may make backup copies of the system configuration as required. If the Hardware is being installed on a network, you
may install the Software on the network server or other server-side devise on which the Hardware is being installed and onto the client-side
devices.
2. Restrictions. The license granted is a limited license. You may NOT:
• sublicense, assign, or distribute copies of the Software to others;
• decompile, reverse engineer, disassemble or otherwise reduce the Software or any part thereof to a human perceivable form;
• modify, adapt, translate or create derivative works based upon the Software or any part thereof; or
• rent, lease, loan or otherwise operate for profit the Software.
3. Transfer. You may transfer the Software only where you are also transferring the Hardware. In such cases, you must remove all copies of
the Software from any devices onto which you have installed it, and must ensure that the party to whom you transfer the Hardware receives this
License Agreement and Limited Warranty.
4. Upgrades Covered. This License covers the Software originally provided to you with the Hardware, and any additional software that you
may receive from Siemens Subscriber Networks, whether delivered via tangible media (CD ROM or floppy disk), down loaded from Siemens
Subscriber Networks, or delivered through customer support. Any such additional software shall be considered "Software" for all purposes un-
der this License.
5. Export Law Assurances. You acknowledge that the Software may be subject to export control laws and regulations of the U.S.A. You con-
firm that you will not export or re-export the Software to any countries that are subject to export restrictions.
6. No Other Rights Granted. Other than the limited license expressly granted herein, no license, whether express or implied, by estoppel or
otherwise, is granted to any copyright, patent, trademark, trade secret, or other proprietary rights of Siemens Subscriber Networks or its licen-
sors.
7. Termination. Without limiting Siemens Subscriber Networks's other rights, Siemens Subscriber Networks may terminate this license if you
fail to comply with any of these provisions. Upon termination, you must return the Software and all copies thereof.
Limited Warranty
The following limited warranties provided by Siemens Subscriber Networks extend to the original end user of the Hardware/licensee of the Soft-
ware and are not assignable or transferable to any subsequent purchaser/licensee.
1. Hardware. Siemens Subscriber Networks warrants that the Hardware will be free from defects in materials and workmanship and will per-
form substantially in compliance with the user documentation relating to the Hardware for a period of one year from the date the original end
user received the Hardware.
2. Software. Siemens Subscriber Networks warrants that the Software will perform substantially in compliance with the end user documenta-
tion provided with the Hardware and Software for a period of ninety days from the date the original end user received the Hardware and Soft-
ware. The end user is responsible for the selection of Hardware and Software used in the end user's network. Given the wide range of third-
party hardware and applications, Siemens Subscriber Networks does not warrant the compatibility or uninterrupted or error free operation of
our Software with the end user's systems or network.
3. Exclusive Remedy. Your exclusive remedy and Siemens Subscriber Networks's exclusive obligation for breach of this limited warranty is,
in Siemens Subscriber Networks's sole option, either (a) a refund of the purchase price paid for the Hardware/Software or (b) repair or replace-
ment of the Hardware/Software with new or remanufactured products. Any replacement Hardware or Software will be warranted for the remain-
der of the original warranty period or thirty days, which ever is longer.
4. Warranty Procedures. If a problem develops during the limited warranty period, the end user shall follow the procedure outlined below:
Α. Prior to returning a product under this warranty, the end user must first call Siemens Subscriber Networks at (888) 286-9375, or send an
email to Siemens Subscriber Networks at support@efficient.com to obtain a return materials authorization (RMA) number. RMAs are issued
between 8:00 a.m. and 5:00 p.m. Central Time, excluding weekends and holidays. The end user must provide the serial number(s) of the products
in order to obtain an RMA.
SIEMENS
Werbung
