Sharp MX-FR16U Bedienungsanleitung Seite 28

ENGLISH
Document Control Setting
Combining the document control function with other functions
Function
combined with
document control
Exposure
Copy Ratio
Duplex
Rotation Copy
setting
Margin Shift
Erase
Pamphlet Copy
Job Build
2in1
Card Shot
Stamp
Photo Repeat
Mirror Image
Centering
B/W Reverse
Bus. Card Scan
Other functions
26
Operation of document control pattern printing
The pattern is always printed at the same exposure regardless of the exposure
setting.
The pattern is always printed at the same ratio regardless of the ratio setting.
The pattern is printed on the back side as well as the front side when 2-sided
copy is performed. (The orientation of the original, tablet or book, is not taken
into account.)
The pattern does not change when rotation copy is used. (The orientation of
the pattern depends on the orientation of the paper in the tray.)
The position of the pattern does not change when margin shift is used. (The
margin width does not affect the position of the pattern.)
The pattern is printed normally on the edge that is erased.
Printed based on the paper used for pamphlet copy.
The pattern is printed normally.
Printed based on the paper. The pattern is printed normally on the sheet of
paper.
The pattern is printed once each time the front side and the back side of the
original are scanned.
If the pattern and the stamp item overlap, the pattern is given priority.
The pattern is printed once for one scan of a photo.
The pattern is printed in the normal orientation without being inverted.
The pattern is printed normally.
Patterns are printed normally without black/white inversion.
The pattern is printed normally.
The pattern is printed normally when Sharpness, Suppress Background,
Brightness and/or Intensity settings are used.