Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Light controls
The start-up colourful lights default to a gradual change. Press the left joystick or right joystick to left
and right during standby mode to change the colourful lights into seven cycles. Press the left joystick
during flight to change the colourful lights. Seven times for a cycle.
One key take-off/landing
1. When the drone is in standby mode, press the one key takeoff/landing button, the drone will
automatically take off and hover at a height of 1.5 meters.
2. When the drone is in flight, press the one key takeoff/landing button and the drone will automati-
cally land on the ground.
Altitude hold
When releasing the left joystick (throttle) after controlling the drone to ascend/descend, the drone
will continue to hover at the current height.
16
Werbung
