Herunterladen Diese Seite drucken

SYMA X440 Bedienungsanleitung Seite 12

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3.5 Remote Control Use
4x1.5V"AAA"batteries
Remote control battery installation: Open the battery cover on the back of the remote control, and
install 4*AAA batteries correctly according to the electrode instructions of the battery box(battery
needs to be purchased separately)
Note:
!
1. When installing the battery, please make sure that the polarity of the battery matches the polarity of
the battery box. Batteries must not be installed with reversed polarity.
2. Please do not use new and old batteries together.
3. Please do not use different types of batteries together.
4. Do not use rechargeable batteries.
4.0 Flight Guide
4.1 Flight Preparation
Pairing the drone with the remote control
1. Turn on the power switch of
the remote control.
9
2. Press and hold the power
switch on the drone for 2
seconds to switch on the drone.
Battery cover
3. Push the left joystick (throttle)
fully up and down. The indicators
on the drone and remote will
change from flashing to solid to
indicate that the drone is in
flight-standby mode.

Werbung

loading