Bosch Intuvia 100 Originalbetriebsanleitung Seite 14

English – 4
5-button operating unit
scroll left (5-button operating unit)
scroll right (5-button operating unit)
Increase assistance level
Decrease assistance level
Select button (press briefly)
Select button (press and hold > 1 s)
Note: All screenshots showing the display and text on the
following pages are from the approved software version. The
display and/or text may change slightly following a software
update.
Note: Depending on the lighting conditions, there is back-
ground lighting that is only activated by pressing a button.
The lighting duration can be adjusted.
Displays and settings of the on-
board computer
Speed and distance indicators
The speedometer always displays the current speed.
You can choose from the following functions in the function
display (combination of text indicator and value indicator):
– <Distance>: Distance travelled since the last reset
– <Riding time>: Journey time since the last reset
– <Time>: Current time
– <Range>: Estimated range of the eBike's available bat-
tery charge (at constant conditions such as assistance
level, route profile, etc.)
– <Avg. Speed>: Average speed achieved since the last re-
set
– <Max. Speed>: Maximum speed achieved since the last
reset
– <Total distance>: Total distance travelled with the eBike
(cannot be reset)
Note: The on-board computer automatically displays a gear
change recommendation when riding the eBike. The display
of the gear change recommendation is superimposed over
the text display (f) of the on-board computer, and can be de-
activated manually via the basic settings.
Switching in the Function Indicator
Press the or
function is displayed.
0 275 007 3BI | (03.02.2023)
button until the required
Press the select button until the required
function is displayed.
Certain settings cannot be assumed on the on-board com-
puter, but only in the eBike Flow app, e.g.:
– <Wheel circum.>
– <Range reset>
– <Auto trip reset>
In addition, you receive an overview of the operating hours
and the installed components in the eBike Flow app.
Displaying/adjusting basic settings
Note: The settings menu cannot be called up while riding.
To get to the basic settings menu, keep pressing the
lect button on the operating unit until <Settings> appears in
the text display.
Switching/Leaving Basic Settings
Press the or
sic setting is displayed.
Press the select button until the required ba-
sic setting is displayed.
Note: The changed setting is automatically saved upon leav-
ing the respective basic setting.
Changing Basic Settings
To scroll down, briefly press the
ton until the required value is displayed.
To scroll down, press the
until the required value is displayed.
Note: Pressing and holding the relevant button switches
automatically to the next value in the basic settings.
You can choose between the following basic settings:
– <Language>: You can select your preferred system lan-
guage here.
– <Units>: Displaying the speed and distance in either kilo-
metres or miles.
– <Time>: You can set the time here.
– <Time format>: Displaying the time in 12-hour or 24-
hour format.
– <Shift recom.>: You can choose whether or not to have a
prompt displayed when it is recommended that you
change gears.
– <Backlight>: You can set the duration of the background
lighting here.
– <Brightness>: The brightness can be adjusted to various
levels.
– <Reset settings?>: You can reset the settings by press-
ing and holding the select button here.
– <Certifications>
se-
button until the required ba-
select but-
select button > 1 s
Bosch eBike Systems