Omnitronic FAS 2 Bedienungsanleitung Seite 25

4.2 Charging
When the battery of the receiver or bodypack is empty or low, the charging
indicator flashes. To charge the device, connect it via USB cable to the power
supply unit or a USB power source. The battery is now charging and the
charging indicator lights up red for the receiver and green for the bodypack
transmitter. When the battery is fully charged, the respective LED indicator
goes out.
4.3 Changing the transmission channel
If transmission interference occurs at the site (there are sound dropouts or
the reception indicator on the receiver goes out), the transmission frequency
can be easily changed on the bodypack transmitter or handheld microphone.
Two options are available for this purpose:
► Fixed frequency selection
Briefly press the SET key on the transmitters. Each keystroke advances one
channel (frequencies
immediately and the reception indicators light up for confirmation.
section 7.2). The receiver accepts the setting
25 • EN