uebler 15850 Montage- Und Bedienungsanleitung Seite 12

Lights
Description
Indicators
BL HY21W 12V yellow
3
Number plate light
BL C5W 12V (35 mm long)
white
3
Rear fog-light in
left tail light
BL PR21W 12V red
3
Reversing light for
right tail light
BL PR21W 12V white
3
brake / tail light
BL P21/5W 12V white
3. Bulb is commercially available.
Folding out / collapsing the bicycle rack
Folding out the bicycle rack
6
90°
6
1. Open the quick release clamp (6) to approx a 90° position.
2. Fold up the rack frame (7) and fully close down the quick
release clamp (6) .
8
3. Fold out the wheel rails (8) and engage.
Replacement
item no.
see no. 32, E1640
page 15
see no. 33,
page 15
see no. 34,
page 15
see no. 34,
page 15
see no. 35,
page 15
6
M+P-25A-0201
8
M+P-25A-0186
--
--
--
9
--
4. Fold out the tail lamps (9) and engage.
5. Unlock the brackets (10 and 11) with the key (3).
6. Swing the brackets (10 and 11) forward and slide along the
track frame (7) into the required position.
Note
The registration number on the bicycle rack must match the
registration number of the vehicle and be clearly legible.
7
12
7. Press the bracket (17) down. Insert the number plate in the
number plate holder (12), press up against the stoppers (18)
and insert fully. Release the bracket (17) and check that it is
positioned securely.
Note
To insert higher number plates, press the stoppers (18) back
and slide the plate fully into the number plate holder (12).
For narrow number plates, use the drilling points (19) for
attaching the plate.
- 10 -
11
3
18
19
10
7
M+P-25A-0187
17
M+P-25A-0188