HP CC200 Kurzanleitung Seite 4

USAGE TIPS
1. Power On / Off
Power On: Press and hold the power button for 1 second, either on the top side of the projector or on the
remote control.
Power Off: Press and hold the power button for 1 second, either on the top side of the projector or on the
remote control. CC200 will display the power off prompt, followed by shut down.
2. Focus Adjustment
To ensure a clear and sharp display, please adjust the focus of the projector before use. By pressing the
Focus [+] and Focus [–] buttons on the remote control, it will allow for precise adjustment of the display
focus according to your preferences.
Please be kindly reminded that the optimal viewing distance of CC200, is between 1 and 3 meters (~3-9 ft)
from the projector to the display surface.
3. Plug and Play
You can connect CC200 through the HDMI input interface to project your content from an external video
source (mobile, tablet, laptop, PC etc.). You can also directly display images or video located in the internal
memory or any external storage via USB.
Enjoy your CC200!
EN
- 2 -