Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bedienungs- und Wartungsanleitung für Handschweißextruder Serie HSK18 RSX
11. Air heater
Please pay attention to the manufacturers operating and maintenance instructions.
For the air supply we recommend to use our compactor DT 4.25. The air generated
by this device is much cleaner and drier compared to compressed air generated by
normal compressors. Further more, the energy costs involved represent only a small
portion of the production costs of compressed air.
12. Special accessories
- Diverse pipe burner prolongations and sheet dies
- Portable air compactor (400 l/min., 1 bar) to operate air heater
- complete welding nozzle programme for sheet width from 5 mm to 40 mm, suitable
for fillet, V and corner welds
- welding nozzle blanks with the following dimensions:
- welding nozzle preheating
- Handle with angle adapt ion
Please contact your retailer for further accessories or get in direct contact with HSK.
HSK Kunststoff Schweißtechnik GmbH
Am Turm 9
D-53721 Siegburg
Germany
Tel.: (+49) 02241/52727; Fax: (+49) 02241/55405
http://www.schweissextruder.de
38
HSK Kunststoff Schweißtechnik GmbH
50 mm * 30 mm
52 mm * 40 mm
70 mm * 72 mm
Special dimensions on request
Werbung
