Oase FP 1500 Gebrauchsanleitung Seite 13

Storage/winter protection
The unit is not frost-proof and has to be removed and put into storage if minus temperatures
are expected.
How to correctly store the unit:
• Drain the water remaining in the unit, in the hoses, pipes and connections as much as possi-
ble.
• Thoroughly clean the unit.
• Check the unit for damage and replace damaged components.
• Store the pump submerged and in a frost-free environment.
• Protect open plug connections from moisture and dirt.
Malfunction remedy
Malfunction
The unit is not operating
Insufficient delivery rate
Unit switches off after a short run-
ning period
Wear parts
• Impeller
Disposal
NOTE
Do not dispose of this unit with household waste.
 Dispose of the unit by using the return system provided for this purpose.
 Should you have questions, please contact your local disposal company. They will give you in-
formation on how to correctly dispose of the unit.
Render the unit unusable by cutting the cables.

Cause
No mains voltage
Impeller blocked
Strainer casing clogged
Excessive pressure losses in the
hoses
Water temperature too high
Remedy
Check mains voltage
Clean impeller
Clean strainer casing
Reduce hose length and connect-
ing parts to a minimum, route
hoses as straight as possible
Note maximum water temperature
of +35 °C
EN
13