Sennheiser freeSound HiDyn plus RS 8 Bedienungsanleitung Seite 21

Technical data
Modulation
Range
Audio frequency response
THD
Noise suppression system
Power supply
Power consumption of transmitter
RF output power
Signal-to-noise ratio
Frequencies T 8
Frequencies T 8-9
Audio input voltage
Audio connector
Charging compartments
Weight
Dimensions
Transducer principle
Signal-to-noise ratio
Max. sound pressure level
Tuning range HDR 8
Tuning range HDR 8-9
Power supply
Current consumption
Operating time
Weight
Dimensions
RS 8 system
FM stereo
up to 100 m
20 - 20,000 Hz
‹ 0.8 %
Sennheiser ©
HiDyn plus
T 8 transmitter
12 V DC via plug-in mains unit NT 92
approx. 1 VA
typ. 1.2 mW
typ. 95 dB
433.40 MHz, 434.13 MHz, 434.50 MHz
924.8 MHz, 925.8 MHz, 926.5 MHz
RF channels switchable
350 mV - 3 V
3.5 mm stereo jack plug + 1/4" (6.3 mm) adaptor
2, for BA 151
approx. 90 g (without plug-in mains unit)
130 x 140 x 40 mm
HDR 8 headphone receiver
open
› 80 dB
105 dB
433 - 435 MHz, stepless
923 - 927 MHz, stepless
via BA 151 rechargeable accuplug, 2.4 V
approx. 18 mA
approx. 3.5 hrs per accuplug
approx. 160 g incl. accuplug
150 x 80 x 200 mm
21