Costway TQ10100 Handbuch Seite 19

1 1
1. Wyrównaj siedzisko z oparciem siedziska.
2. Wyrównaj zaczepy oparcia z otworami w korpusie pojazdu.
wspornikach.
4
5
5
134
3
6
6
2
1. Fit the seat to the seat back.
2. Fit the tabs on the seat back into holes in the vehicle body.
3. Insert two Ø4x16 screws through the seat and into the holes on top of the
seat board. Tighten them with a screwdriver.
4. Use a screwdriver to unscrew the screws on the back of the light bar
linkage.
5. Insert 2x1.5 AA batteries (Not Included) in their correct polarities, refer to
the battery information. And replace the battery cover.
6. Fit the light bar supports to the light bar linkage. And ensure the locks
inside the light bar linkage "click" into the holes on each light bar support.
4
5
Attach the Seat & Light Bar
3
1 1
5
6
2
6
19