Werbung
Verfügbare Sprachen
Verfügbare Sprachen
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value: a
Uncertainty K = 1.5 m/s²
The declared vibration total value and the
declared noise emission value have been
measured in accordance with a standard test method
and may be used for comparing one tool with
another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
EN
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
16
< 2.5 m/s²
h
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description Battery-operated snow thrower
Type KG470 KG470.X (470- designation of
machinery, representative of Battery-operated
snow thrower)
Function Removing snow
Complies with the following directives,
2006/42/EC, 2014/30/EU, 2011/65/
EU&(EU)2015/863, 2000/14/EC amended by
2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity assessment procedure as per Annex V
- Measured sound power level
- Declared guaranteed sound power level 97 dB(A)
Standards conform to,
EN 62841-1, EN ISO 8437-2, EN ISO 3744, EN IEC
55014-1, EN IEC 55014-2, EN IEC 63000
The person authorized to compile the technical file,
Name
Marcel Filz
Address
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2023/04/06
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
96 dB(A)
Werbung
