Werbung
Verfügbare Sprachen
Verfügbare Sprachen
moving backward. Do not start snow throwing
action when moving backward.
Stopping snow throwing
Release the auger control lever and both auger and
drive motor will stop.
NOTE: Remove the batteries and wait for all
revolving parts to stop completely after operation.
LED lights (See Fig. F)
A
F
Press the LED button to turn on the LED lights.
LED lighting increases visibility - great for dark or
enclosed area.
HOW TO USE YOUR SNOW
THROWER
1. Remove all foreign objects from the area to be
throwed before operating the machine.
2. Do not force your snow thrower.
3. If the snow thrower collides with obstacles or
foreign objects while moving, stop the snow
thrower, remove the battery, clear the obstacles
or foreign objects, and check if the unit is
damaged.
HOW TO CLEAR A DRIVEWAY/EXPERTS OFFER
TACTICAL TIPS (See Fig. G)
A
G
SNOW THROWER (NON-WINDY CONDITIONS)
(1) Cut a path straight down the middle of the
driveway with the discharge chute facing left.
(2) Without adjusting the discharge chute, turn
machine around 180 degrees.
(3) Return to driveway's start. Turn machine the
same direction as before.
(4) Continue making circle.
Replacing Shear Bolts (See Fig. H)
A
H
FOR BATTERY TOOLS
The ambient temperature range for tool and
battery use and storage is 0
F).
O
The recommended ambient temperature range for
the charging system during charging is 0
(32
F-104
F).
O
O
Details regarding safe disposal of used batteries
At the end of the life of the appliance, remove
the battery pack safely before disposing of the
appliance. Do not throw batteries away or throw
them in the normal trash can. Also do not dispose
of the battery with the machine. Remove the used
battery pack from the appliance and dispose of it
at the nearest or convenient dedicated recycling
facility. If in doubt, consult your local environmental
protection department. Batteries may enter
water cycle if disposed improperly, which can be
hazardous for ecosystem. Do not dispose of waste
batteries as unsorted municipal waste.
TRANSPORTATION
Transporting the machine
1. Switch off the machine and remove the battery.
2. When transporting your machine in a vehicle,
secure and position it to prevent movement or
damage.
Transporting the battery
1. Ensure the battery is in a safe condition.
2. Use non-conductive packaging when
transporting the battery.
3. The contained Li-Ion batteries are subject to the
C-45
C (32
F-113
o
o
O
C-40
C
o
o
13
EN
Werbung
