Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on
the following pages.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter, and clean the brushes.
Part
Care Frequency
Bin
Wash bin as needed
Clean once a week (twice a week if you
Filter
have a pet).Do not wash.
Full Bin Sensor
Clean every 2 weeks
Front Caster Wheel
Clean every 2 weeks
Edge-Sweeping Brush
Clean once a month (twice a month if
and Multi-Surface
you have a pet)
Brushes
Sensors and Charging
Clean once a month
Contacts
Camera Window
Clean and inspect once a month
Mopping pad
Clean after a mopping job
Wick cap
Replace if dirty or shows wear
Note:
iRobot manufactures various replacement parts and assemblies.
If you think you need a replacement part, please contact iRobot
Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Emptying the Bin
1
Replacement
Frequency*
-
Every 2 months
2
-
Every 12 months
Every 12 months
-
After 30 washes
3
After 30 washes
-
Press bin release button to
remove bin.
Open bin door to empty bin.
Place bin back in the robot.
Roomba Combo™ j5 Owner's Guide
Cleaning the Filter
1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your trash
container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important:
The robot will
not run if the filter is not
installed correctly. Replace
the filter every two months.
5
EN
Werbung
