Add Device - HomeMatic IP HmIP-BROLL-2 Installations- Und Bedienungsanleitung

Start-up
Step 10
Step 11
Step 12
Step 13
6.3

Add device

Please read this entire section before starting
the pairing procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device to the Access Point
or to the Central Control Unit CCU3. For detailed
information, please refer to the Homematic IP
User Guide, available for download in the down-
load area of www.homematic-ip.com.
46
Insert a suitable adapter in the frame on the
shutter actuator (see Fig. 7).
Insert the rocker in the frame (see Fig. 8).
Switch the fuse of the power circuit back
on again.
Now the Shutter Actuator can be added to
the Homematic IP Access Point (see „6.3
Add device" on page 46).