Werbung
Anleitung_BT_MG_180_1_SPK1:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. ON/OFF switch
2. Tool mounting
3. Dust extractor adapter
4. Dust extraction device
5. Allen key
6. Saw blade
7. Scraper
8. Triangular sanding/grinding plate
9. Allen key for changing tools
3. Proper use
The equipment is designed for the sanding/grinding
of wood, iron, plastic and similar materials using the
appropriate sanding/grinding paper. Furthermore, the
equipment is intended for sawing wood, plastic and
similar materials, as well as scraping off glued
carpets, filling compound residues, old paint and
similar applications.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
16.03.2009
9:20 Uhr
Seite 11
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
230 V ~ 50 Hz
Power input:
Idling speed:
21000 rpm
Oscillation angle:
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
sound pressure level
89.6 dB(A)
pA
K
uncertainty
pA
L
sound power level
100.6 dB(A)
WA
K
uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Handle
Vibration emission value a h = 3.516m/s²
K uncertainty = 1.5 m/s
2
Important!
The vibration value changes according to the area of
application of the electric tool and may exceed the
specified value in exceptional circumstances.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
GB
180 W
3°
II /
1.3 kg
3 dB
3 dB
11
Werbung
