Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.9.1 Main display
The hot tub LCD display comprises four digits and two rows of text. The display normally shows three
figures: the hot tub temperature, the set hot tub temperature, and the time information (day of the week
POOL EQUIPMENT
KLIN GOTHIC ITC DEMI-13,3 b
and time). As the default, the current hot tub temperature is shown in the digits and the time and the set
temperature are in the two rows of text. If the user prefers a different arrangement, this configuration can be
changed so that the main display either shows the set temperature or the clock (4 digits) instead of the smaller
text rows. In addition, you can choose a cycling mode, with each of the three available displays shown for
10 seconds. Available options:
zlatá
černá
POOL TEMP
SET TEMP
CLOCK
CYCLING
9.9.2 Changing the main display
1. Select the MISC OPTIONS sub-menu from the main menu.
2. Select the menu item MAIN DISPLAY.
3. Press the SCROLL button to start choosing the heating control settings (see table).
4. Use the UP and DOWN buttons to set the heating setting.
5. Press the SCROLL button to confirm the current setting and return to the MISC OPTIONS sub-menu.
9.9.3 Colour and brightness of the panel light
The user can change the colour and brightness of the display backlighting to a setting of the user's choice.
Remember that these manual settings will only work either when the hot tub light is off or when the panel
and pool light synchronisation feature is deactivated.
9.9.4 Changing the control panel backlighting colour
1. Select the MISC OPTIONS sub-menu from the main menu.
2. Select the menu item PANEL LIGHT COLOUR.
3. Press the SCROLL button to start choosing the light colour.
4. Use the UP and DOWN buttons to set the required colour.
5. Press the SCROLL button to confirm the current setting and return to the MISC OPTIONS sub-menu.
9.9.5 Changing the control panel backlighting brightness
1. Select the MISC OPTIONS sub-menu from the main menu.
2. Select the menu item PANEL LIGHT INTENSITY.
3. Press the SCROLL button to start adjusting the light brightness.
4. Use the UP and DOWN buttons to set the required brightness.
5. Press the SCROLL button to confirm the current setting and return to the MISC OPTIONS sub-menu.
Note that the backlighting brightness setting only works while the hot tub is in use. The backlighting
brightness reverts automatically to the default setting of 34% after 90 minutes of not using the control panel
(no button pressed). The reason for this is to ensure the long life of the backlighting diodes. As soon as you
press a button on the control panel, the default factory setting is restored.
PANTONE 871 U
PANTONE 426 U
the default setting; set temperature and clock in the text rows
clock and hot tub temperature in the text rows
set temperature and hot tub temperature in the text rows
above settings 1-3 alternating periodically for 10 seconds each
25
EN
Werbung
