Operating Menu "Test; Operating Menu "Automatic; Operating Menu "Change Zone; Operating Menu "Time - Honeywell 013002 Bedienungsanleitung

Operating Manual Touch operating module for MB/MB-Secure
Operating menu
6.4
The key "Test" opens the menu for the
walk test as well as display and buzzer
test.
In the menu you can activate or switch off
the walk test for the selected zone. The
walk test is switched off by arming/
disarming the zone, too.
In the menu you can also test the display
and the buzzer of the Touch operating
module.
Use the key "
operating menu "Selection".
6.5 Operating menu
"Automatic"
The "Automatic" button is only available if
there exist executable macros. The
menu displays the macros. The "Start"
key is used to start the selected macro.
6.6 Operating menu
"Change zone"
The key "Change zone" opens the

operating menu "change zone".

Use the keys " " or "
desired zone. Then change to this zone
with the key "OK".
If the selected zone requires an other
operation code, the display jumps to the
menu "Code input".
After entering the required code you can
operate the selected zone
Use the key "
operating menu "Selection".
6.7

Operating menu "Time"

The key "Time" opens the operating
menu "Time" for setting time and date.
Use the keys " " or "
marked value.
Then change to the next value using key "
".
Additionally you can activate the daylight
saving time automatic.
Use the key "OK" to confirm the changed
values.
Use the key "
operating menu "Selection".
"Test"
" to switch back to
" to select the
" to switch back to
" to adjust the
" to switch back to
Walk test
Switched off
Zone 1/00
Zone 2/00
Zone 3/00
Zone 4/00
Zone 5/00
Menu time
17 : 05
Time
18 . 04 . 2013
Date
*daylight savings time automatic*
Daylight saving
Autom. On / Off
Zone 1/00
disarmed
Test display and
buzzer
Start walk test
Zone 1/00
disarmed
17:10:24
18. April 2013
25
OK
OK