Operation Without / With Code; Code Input; Overview Of Levels Of Authorization - Honeywell 013002 Bedienungsanleitung

22
5. Operating without / with code
The Touch operating module can be programmed as follows depending on the application:
- For one zone; display with code; operation with code
- For one zone; display without code; operation with code
- For one zone; display without code; operation without code
- For several zones; display with code; operation with code
- For several zones; display without code; operation with code
- For several zones; display without code; operation without code
Depending on this programming, it is necessary to enter a code before further operation or before the
system status is displayed.
5.1

Code input

- Enter code and
- Acknowledge by touching "OK".
The operating functions are distributed
over 3 different authorization levels.
The desired function can only be selected
if the corresponding authorization level
(4-digit code, 5-digit code or 6-digit code)
has been entered.
5.2

Overview of levels of authorization

The following overview provides information on which operating functions of the intrusion control
panels 561-MB100.10 / MB48 / HB48.10 / MB24 / HB24 may require the entry of a code according to
the programming.
Code 4-digit
- View detector groups
- Start macro
- Internal arming
- Touch module settings
- Slideshow
The levels of authorization mentioned above are not relevant for the
561- MB256 plus. In this control panel the individual operating functions are allocated to the
operating code with 1 to 8 digits).
Ask the installer for further information on the operating code (number of digits and
released functions).
Operating Manual Touch operating module for MB/MB-Secure
Please enter code
----------
Code 5-digit
- Clear detector groups
- Internal disable detector groups
- Activate walk test
- View event memory
- Internal disarming
Operation code
1
4
7
CLR
Code 6-digit
- External disabling/enabling
- Clear tamper detector groups
- Change date and time
intrusion control panel
1
1
1
1
1
1
2 3
6
5
8
9
0
OK