Operating Menu "Detector Groups; Operating Menu " Event Memory - Honeywell 013002 Bedienungsanleitung

24
6.2 Operating menu
"Detector groups"
The key "Detector groups" opens the
menu for switching on/off of the detector
groups.
The left window shows the actual number
of detector groups which are switched on
or off and stored detector groups.
The keys on the right open the respective
menu for switching on/off of the selected
type of detector groups.
Example:
The illustration shows the menu "Int.
detector groups on / off".
Detector group 003 is marked. Use key
"Switch off" to switch off detector group
003 for presence security (internally
armed).
Detector group 001 is already switched
off, see crossed out text.
Use the keys " " or "
the desired detector group.
If the marked detector group is switched
off, the key changes to "Switch on".
Use the key " " to switch to the menu
"Detector groups".
6.3 Menu "Event memory"
The key "Event memory" opens the
display for events and alarms.
The left part of the screen shows the
actual state of the alarm counter. The
alarm counter shows the number of
external alarms from start-up of the
system.
The keys on the right serve to show the
memoryof all events and the alarm
events.
With key "Only alarms" the event memory
is filtered for alarm entrys. The window of
the alarm memory shows all alarm
events, also internal alarms.
Use the key " " to switch from menu
"All events" or "Only alarms" back to
menu "Event memory".
Operating Manual Touch operating module for MB/MB-Secure
Actual state
001 switched off
000 stored DG
" to change to
Alarm counter
004 Alarms
Zone 1/00
disarmed
Internal detector group
Detector group 001
Detector group 002
Detector group 003
Detector group 004
Detector group 005
Currently triggered detector groups are
colour-coded.
Zone 1/00
disarmed
Int. detector group
on / off
Ext. detector group
on / off
Technical group
on / off
Fire detector group
on / off
Switch off
All events
Only alarms