EuroLite LED BAR-6 Bedienungsanleitung Seite 20

OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Menu structure
Mode
DMX mode
Automatic mode
Sound control
Running speed in automatic
and sound mode
Microphone sensitivity for
sound control
Individual brightness
Dimmer
Silent scene
Slave mode
Stand-alone mode
Automatic mode
In automatic mode, 4 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au 1-4). Confirm with the
ENTER button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (So 1-3). Confirm with the
ENTER button.
2 Press the MENU button so many times until SEnS is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the music
(SE 1 = low, SE 9 = high).
3 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Display
2CH
Addr
1CH
Auto Au 1-4
Soun So 1-3
SPEE SP 1-9
SEnS SE 1-9
Colo U000-255
diMM dI 1-dI 9
on
SILE
oFF
SLAV Slave
20/24
d001-512 2-channel mode and start address
d001-512 1-channel mode and start address
Auto program
Sound control program
Program running speed
slow > fast
Microphone sensitivity
low > high
UV
Total brightness (Auto, Soun and
Colo modes)
dark > bright
Program does not automatically
continue during periods without
music or bass-beat / LEDs turn off
Program continues automatically
during periods without music or
bass-beat
Slave mode
Function
00124625, Version 1.0