Maintenance And Care; Noise Development; Technical Data - Clatronic HTD 2939 Bedienungsanleitung

Position 2: strong air flow and high temperature
COOL-Shot: With this switch it is possible to interrupt
the heating process so that the air can be
mixed according to individual requirements.
Switch-off
After use, slide the switch to position "0" and disconnect from
the mains.
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result of
heat accumulation.
• Unscrew the grille in an anticlockwise direction.
• Remove any dirt that is present.
• If necessary, a fine brush can be used.
• Turn the grille tight in a clockwise direction.

Noise development

The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 84 dB(A) (no limit).

Technical Data

Model: ..........................................................................HTD 2939
Power supply: ...................................................... 230 V~ ; 50 Hz
Power consumption: ........................................................ 2000 W
Protection class: ......................................................................... ΙI
Net weight: ........................................................................0.40 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
26
Storage
•
Mains Cable
•
•
•

Maintenance and care

This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be disposed
of can be obtained from your local authority.
Leave the device to cool before putting it away! To do so,
place the appliance onto one side of the housing or hang it
up by the suspension eye.
The mains cable should only be wound up loosely.
Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
Check the mains cable regularly for damage.
Disposal