Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Thank you and congratulations on your purchase of this AXTON AC 2-way component
system. This loudspeaker system uses very high quality parts and components only. The
careful development of the speaker units and the crossovers becomes obvious, when the
system is installed and playback starts. As with all high-quality car audio components,
professional installation is highly recommended. If you plan on installing this component
system by yourself, please read the following installation guide carefully, before you
attempt the installation. You should retain this manual, the packing and the purchasing
receipt for future reference. For any further information about mounting, connecting or
adjusting this speaker system, please contact your authorized AXTON dealer.
UNPACKING THE SYSTEM
Carefully remove the loudspeakers, crossovers and the accessories from the giftbox and
check whether all parts are in good undamaged condition, and match with the set
contents listed below:
2 mid/woofers
n
2 grilles
n
2 AT25 tweeters
n
2 crossovers
n
1 set of wiring hardware for tweeter and mid/woofer
n
1 set of tweeter & mid/woofer mounting hardware
n
1 instruction manual with warranty card
n
Please contact your authorized AXTON dealer if the content of this set is incomplete or
parts of it show signs of transport damage.
BEFORE YOU START
The first step is to choose the most suitable or best sounding location for the speakers to
be installed. Keep in mind that the best looking spot might not be the one that gives you
best sound. The factory OEM speaker cutouts usually provide space and a stable platform
for fast and convenient mounting of new mid/woofer units. To use the OEM speaker
cutouts is highly advantageous in most cases and it will also prevent you from having to
cut new holes. For the tweeter mounting, some extra care to find the best spots will
usually pay back in form of improved front staging or/and better resolution.
– 8 –
– 8 –
Werbung
