AXTON AXC25 Einbauanleitung Seite 13

As a general rule of thumb, the -6dB position is is best for tweeters that are mounted very
close to the listener's head, or for tweeters mounted on top of the dash-board and in the
window triangles or A-pillars.
The -3dB position is usually the setting that provides a good tonal balance for most in-
stalls, while the 0dB position leaves you with a slight excess of energy in the treble region.
Attention: The tweeter attennuation switches must both be set to identical position on
both crossovers!
After completing all the available settings for mid/woofer lowpass slope, tweeter attenua-
tion and polarity, you can mount the crossover in place and reinstall all the other panels /
factory grilles a.s.o.
Your installation is now complete and therefore ready, to be checked out.
TESTING THE INSTALLED SYSTEM
Slowly turn up the volume of your head unit, and listen for distorted sounds. If everything
appears to be okay and it just sounds right, check out the speaker balance of the left and
right side by adjusting the balance control of your headunit. Shifting the balance to the left
channel should provide you with sounds coming solely from the left speaker system, while
shifting the balance to the right should do the same for the right speakers. If anything
appears to be wrong, you must recheck the wiring of the x-overs, the amp or the mid/
woofers.
TECHNICAL SPECIFICATIONS
Type
Nominal Size
Configuration / System
Peak Power Handling
Continuous Power Handling
Crossover Slope LP Mid/Woofer 6/12dB / oct.
Crossover Slope HP Tweeter
Crossover Frequency
Nominal Impedance
Sensitivity
Frequency Response (- 3dB)
Mid Woofer
Basket (EURO-DIN)
Mounting Depth
Mounting Diameter
Tweeter
Overall Diameter
Mounting Height (flat surface)
Mounting Diameter (recessed)
AC25 AC26
Component Component
5¼" (13 cm) 6½" (16.5 cm)
2-Way 2-Way
140 W 160 W
100 W RMS 120 W RMS
6/12dB / oct.
12dB / oct. 12dB / oct.
3500 Hz 3500 Hz
4 Ohms 4 Ohms
90 dB 91 dB
70 Hz – 25 kHz 60 Hz–25 kHz
5¼" (13 cm) 6½" (16.5 cm)
62 mm 66 mm
118 mm 144 mm
52 mm 52 mm
31 mm 31 mm
52 mm 52 mm
– 13 –
AC25ES AC26ES
Component Component
5¼" (13 cm) 6½" (16.5 cm)
2-Way 2-Way
120 W 140 W
80 W RMS 100 W RMS
6/12dB / oct. 6/12dB / oct.
12dB / oct. 12dB / oct.
3500 Hz 3500 Hz
4 Ohms 4 Ohms
88 dB 89 dB
70 Hz – 26 kHz 60 Hz–25 kHz
5¼" (13 cm) 6½" (16.5 cm)
46 mm 50 mm
118 mm 144 mm
52 mm 43 mm
31 mm 31 mm
52 mm 52 mm