EuroLite ED Floodlight 648/5 RGB Bedienungsanleitung Seite 28

Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Sound-control:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Fuse:
Number of channels:
Number of LEDs:
Please note: Every information is subject to change without prior notice. 29.09.2006 ©
230 V AC, 50 Hz ~
50 W
via built-in microphone
405 x160 x 215 mm
4 kg
: 45° C
a
(steady state): 60° C
B
F 1 A, 250 V
48
648
28/52 51913855_V_1_0.DOC