Preparation And Use - eta GUSTUS Bedienungsanleitung

• Prevent your hair, clothing and accessories from getting too close to the rotating parts
to prevent catching and winding them!
• Should excessive vibration occur when using this attachment, either reduce the speed
or stop the machine and remove some of the contents.
• ATTENTION: Do not use this processor in series with an external timer, remote controller
or any other device that switches on the appliance automatically, since a fire risk exists
when the processor is accidentally covered or displaced at the moment it switches on.
• Make sure that the power cord does not come into contact with the rotating part of the
appliance.
• The power cord must not be damaged by sharp or hot objects, by an open flame and
it must not be submerged under water.
• Never place it on hot surfaces and do not leave it hanging over the edge of a table
or a work bench. If the cord is brushed against or pulled by for example children the
appliance may tip over or be pulled down and lead to serious injuries!
• If the use of an extension cord is necessary, then it must not be damaged and must meet
the valid norms in force.
• Only use the appliance with original accessories from the manufacturer.
• Use this appliance only for the purpose for which it was designed as specified in this
user's manual. Never use the appliance for any other purpose.
• WARNING: There is a risk of injury in case of incorrect use (not in accordance with
the manual) of the appliance.
• All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
• The manufacturer takes no responsibility for damages and injuries caused by the
incorrect use of supplementary machines and accessories (e.g. ruining of foods, injury,
cuts) and takes no responsibility arising from the warranty on the appliance in the case
that the above safety notices were not followed.
An integral part of this manual is also a table with the contents of the robot
II. PREPARATION AND USE
First remove all packaging materials, take out the food processor and all accessories.
Then remove all adhesive foils, stickers and paper from the food processor and
accessories. Before the first use, wash all parts, which will be in contact with food, in warm
water with a mild detergent, thoroughly rinse in clear water and wipe dry or let dry. Put the
assembled food processor with the selected attachments on a flat, stable, smooth and
clean worktop, out of reach of children and incapacitated people. Provide sufficient free
space for ventilation. The appliance openings allow free airflow for ventilation, and must
not be covered or otherwise blocked. The feet must not be removed. Electric power socket
must be easily accessible to allow easy disconnecting of the food processor in the case of
emergency.
Notice!
package and instructions for accessories
EN - 25
TAB
.
AC
EN