Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Disk Format
When using a new USB storage device, it is
recommended that you first format it using the Format
option in the Record>Device Info menu in Live TV
mode. Highlight the connected device on the Device
Info screen and press OK or Right directional button
to see the list of available options. Then highlight
Format and press OK to proceed. A confirmation
dialogue will be displayed. Highlight Yes and press
OK to start formatting.
IMPORTANT: Formatting your USB storage device
will erase ALL the data on it and its file system will be
converted to FAT32. In most cases operation errors will
be fixed after a format but you will lose ALL your data.
Schedule List
You can add reminders or record timers using the
Schedule List menu. You can access the Schedule
List from the Record menu in Live TV mode. Highlight
Schedule List and press OK. Previously set timers
will be listed if any available.
Press the Yellow button to add a timer while the
Schedule List menu is displayed on the screen. You
can define the type of the timer by setting the Schedule
Type option as Reminder or Record. When other
parameters are set press the Green button. The timer
will be added to the list.
If any available, you can also edit or delete the timers
on this list. Highlight the timer of your choice and press
the Red button to edit. After you edited the timer press
the Green button to save changes. Highlight the timer
of your choice and press the Blue button to delete.
When you choose to delete a timer a confirmation
dialogue will be displayed on the screen. Highlight Yes
and press OK to delete the selected timer.
A warning message will be displayed if the time
intervals of two timers overlap. You can not set more
than one timer for the same time interval.
Press EXIT button to close the Schedule List.
CEC
With CEC function of your TV you can operate a
connected device with the TV remote control. This
function uses HDMI CEC (Consumer Electronics
Control) to communicate with the connected devices.
Devices must support HDMI CEC and must be
connected with an HDMI connection.
In order to make use of the CEC functionality the
related option in the menu should be switched on.
To check, switch on or off the CEC function, do the
following:
• Enter the Settings>Device Preferences>Inputs
menu on the Home Screen or TV options>Set-
tings>Device Preferences>Inputs menu in Live
TV mode.
• Scroll down to Consumer Electronic Control
(CEC) section. Check if the HDMI control option
is switched on.
• Highlight the HDMI control option and press OK to
switch on or off.
Make sure that all CEC settings are properly set up
on the connected CEC device. The CEC functionality
has different names on different brands. CEC function
might not work with all devices. If you connect a device
with HDMI CEC support to your TV, the related HDMI
input source will be renamed with the connected
device's name.
To operate the connected CEC device, select the
related HDMI input source from the Inputs menu on
the Home Screen. Or press the Source button if the TV
is in Live TV mode and select the related HDMI input
source from the list. To terminate this operation and
control the TV via the remote again, press the Source
button, which will still be functional, on the remote and
switch to another source.
The TV remote is automatically able to control the
device once the connected HDMI source has been
selected. However not all buttons will be forwarded
to the device. Only devices that support CEC Remote
Control function will respond to the TV remote control.
The TV supports also eARC (Enhanced Audio Return
Channel) feature. Similar to ARC, the eARC feature
enables the transfer of the digital audio stream from
your TV to a connected audio device via the HDMI
cable. eARC is an improved version of ARC. It has
a much higher bandwidth than its predecessor.
Bandwidth represents the range of frequencies or
amount of data that is being transferred at a time.
Higher bandwidth translates into a higher amount of
data that can be transferred. Higher bandwidth also
means that digital audio signal doesn't have to be
compressed and is much more detailed, rich, and
vibrant.
When eARC is enabled from the sound menu, TV
first tries to establish eARC link. If eARC is supported
by the connected device, the output turns into eARC
mode and the "eARC" indicator can be observed on
the connected device's OSD. If an eARC link cannot
be established (for example, the connected device
is not supporting eARC but supporting ARC only) or
if eARC is disabled from the sound menu, then TV
initiates ARC.
In order to activate ARC feature the eARC option
should be set as Auto. You can access this option from
the TV options>Settings>Device Preferences>Sound
menu in Live TV mode or from Settings>Device Pref-
erences>Sound menu on the Home Screen. When
eARC is active, TV will mute its other audio outputs
English - 25 -
Werbung
