Finlux FLU5035ANDROID Bedienungsanleitung Seite 55

your preference. All, Right and Left options will
be available. Highlight Demo and press OK to
activate the demo mode. While the demo mode
is active, the screen will be divided into two sec-
tions, one displaying the MJC activity, the other
displaying the normal settings for the TV screen.
If the Demo Partition option is set to All, both
sides will display the MJC activity.
HDMI RGB Range: This setting should be ad-
justed according to input RGB signal range on
HDMI source. It can be limited range (16-235)
or full range (0-255). Set your HDMI RGB range
preference. Auto, Full and Limit options will be
available. This item will not be available, if the
input source is not set as HDMI.
Low Blue Light: Electronic device screens emit
blue light that can cause eye strain and may lead
to eye problems over time. To reduce the effect
of blue light set your preference as Low, Middle,
or High. Set as Off to disable.
Colour Space: You can use this option to set the
range of colours displayed on your TV screen.
When set as On, colours are set according to the
source signal. When set as Auto, the TV decides
to set this function as on or off dynamically, ac-
cording to source signal type. When set as Off, the
TV's maximum colour capacity is used by default.
Colour Tuner: Colour saturation, hue, brightness
can be adjustable for red, green, blue, cyan, ma-
genta, yellow and flesh tone (skin tone) for having
more vivid or more natural image. Set the HUE,
Colour, Brightness, Offset and Gain values
manually. Highlight Enable and press OK to turn
this function on.
11 Point White Balance Correction: White bal-
ance feature calibrates TV's colour temperature in
detailed grey levels. By visually or measurement,
grey scale uniformity can be improved. Adjust the
strength of the Red, Green, Blue colours and Gain
value manually. Highlight Enable and press OK to
turn this function on.
OLED: Displays OLED settings.
OLED Compensation: You can perform this pan-
el maintenance operation manually to protect the
OLED panel and extend its life time. Panel noise
cleaning takes around 90 minutes and TV has to
be on standby mode during this operation. When
the confirmation screen is displayed, highlight Yes
and press OK to perform this operation immediate-
ly. Do not unplug the mains lead during this period.
It is not recommended to perform this operation
more than once a year or unless requested by
authorised service personnel. Refer to the OLED
TV Operations section for more information
before you perform this operation.
Manual OFF-RS Compensation: This operation
will take about 15 minutes and in order not to inter-
rupt it is recommended to wait until the operation
is completed. Highlight and press OK. When the
confirmation screen is displayed, highlight Yes
and press OK to perform this operation. Refer
to the OLED TV Operations section for more
information before you perform this operation.
Pixel Shift: The images will be automatically
shifted every 80 seconds to prevent image
sticking. Highlight this option and press OK to
turn this function on or off. Refer to the OLED TV
Operations section for more information before
you perform this operation.
Reset to Default: Reset the video settings to factory
default settings.
Note: Depending on the currently set input source some menu
options may not be available.
Sound
System Sounds: System sound is the sound
played when navigating or selecting an item on the
TV screen. Highlight this option and press OK to
turn this function on or off.
Sound Style: For easy sound adjustment, you
can select a preset setting. User, Standard,
Vivid, Sports, Movie, Music and News options
will be available. Sound settings will be adjusted
according to the selected sound style. Some other
sound options may become unavailable depending
on the selection.
Balance: Adjust the left and right volume balance
for speakers and headphones.
Sound Surround: Turn the surround sound feature
on or off.
Equalizer Detail: Adjust the equalizer values ac-
cording to your preferences.
Speakers Delay: Adjust the delay value for speakers.
eARC: Set your eARC preference. Off and Auto
options will be available. Set as Off to disable.
Digital Output: Set the digital sound output prefer-
ence. Auto, Bypass, PCM, Dolby Digital Plus and
Dolby Digital options will be available. Highlight the
option you prefer and press OK to set.
Digital Output Delay: Adjust the digital output delay
value.
Auto Volume Control: With Auto Volume Control,
you can set the TV to automatically level out sudden
volume differences. Typically at the beginning of
adverts or when you are switching channels. Turn
this option on/off by pressing OK.
Downmix Mode: Set your preference to convert mul-
ti-channel audio signals to two-channel audio signals.
Press OK to see the options and set. Stereo and
English - 17 -